Thermocouple calibrator T254
DL760-10 Portable Multichannel Temperature Reader
MGP2 laboratory reference gas mixer
T310 Portable digital pressure gauge
T220 – Current loop calibrator 0-20/4-20mA
P/I GM610 Converter
Tinycal series calibrators / simulators
GM810 Pressure transmitter
Reference temperature monitor RTM1-8
DI-8CH portable case
P/I GM710 Converter
DR72 Digital manometer
DPM600 Panel digital pressure gauge
Multifunction calibrator MF680 (Pressure & Electric)
DL760-18 Reference temperature reader and datalogger
Industrial Gas Mixer IGM
T225 Current loop calibrator 0-50 mA
T230 – Volt calibrator 0-10 Vcc
DL760-M18 Portable Multichannel Temperature Reader
pH/mV calibrator T264
T260 – pH/mV calibrator
SGTDL760 Temperature Probe Calibration Software
RTM-1 Reference temperature monitor
Portable calibrator MF680E (Electric)
Pressure generation pump BP102G
RB400BP02 Pneumatic low pressure calibration kit
RB400BP01 Low pneumatic pressure calibration set
IGM-CHHR Humidity generator module for gas mixers
External pressure module MF680
T210 Portable digital pressure gauge
LGM Reference gas mixer for field use
T240 Thermal resistance calibrator (Pt100)
T210-IS ATEX intrinsically safe Digital Manometer
Electric generator HI-301
T250 Thermocouple calibrator
Flexible connection kit for high pressure
T244 resistance thermometer calibrator
A Pt100 probe calibrator with double function: measurement and simulation
The T244 resistance thermometer calibrator belongs to the new range of Tinycal instruments designed by Gometrics. Its new design and its advanced functions make it an ideal instrument for the calibration of Pt100 probes. The keys on its front panel allow configuration for the generation of adjustment values in engineering units or percentages. The panel keys also allow generation in jumps that can be programmed from 1 to 30 seconds per jump, which it memorizes thanks to its 6 configuration keys. The simulation from the instrument can be configured to simulate the sensor response (Pt100 or thermocouple type selected).
La función de medición se puede seleccionar fácilmente con la tecla IN/OUT, como se indica claramente en la pantalla, que indica el valor a medir. Para evitar posibles errores de conexión o manipulación, el circuito de medida está protegido contra cortocircuitos y tensiones externas de hasta 30 V, garantizando una mayor vida útil del instrumento.
Todos los instrumentos de la familia Tinycal ofrecen mediciones de alta precisión y alta resolución que, junto con su facilidad de uso, alta fiabilidad y cómodo transporte, así como su reducido peso y reducido tamaño, los convierten en estándares básicos en un taller de instrumentación.
DL760-10 Portable Multichannel Temperature Reader
High-precision thermometer for multiple temperature probe calibrations and temperature tests. Multiple channels: 6 x Pt100, and 4x thermocouples. Measures electrical quantities (mV, Ω, mA) with their corresponding temperature correlations.
MGP2 laboratory reference gas mixer
MGP2 reference gas mixer allows to blend up to 8 gases. Users can prepare any mixture of gases in matter of seconds thanks to touch screen interface. Precise, ergonomic, safe. Homogeneity of the mixture is guaranteed by a patented method.
Industrial Gas Mixer IGM
The IGM is ideal solution for preparation of gas blends. Its rugged design allows high pressures and flows. With the software you can generate a gas mix with the desired ppm at the output mix.
SGTDL760 Temperature Probe Calibration Software
Temperature calibration management software with seamless interface with the DL760 temperature reader family. The software allows the automatic management of temperature calibrations and the control of the dry block or temperature baths.
IGM-CHHR Humidity generator module for gas mixers
The IGM-CHHR is a humidity module that can be used together with the IGM or MGP2 gas mixers to create gas blends including a certain degree of relative humidity. This innovative device is the latest creation of our engineering team.
LGM Reference gas mixer for field use
Gometrics Lean Gas Mixer takes a balance gas input and up to 3 standard gases. Can be delivered with no display and is operated from a PC. Battery option and hand grip for field use.
T250 Thermocouple calibrator
Generation/simulation or measurement of thermocouple signal (mV). Keys on the instrument’s front panel enable configuration for generation of set values in either engineering units or percentages.