T240 Thermal resistance calibrator (Pt100)


Generation/simulation or measurement of Pt100 signal (ohm). Keys on the instrument’s front panel enable configuration for generation of set values in either engineering units or percentages.

All Tinycal series instruments are dual function: generation/simulation and measurement. Keys on the instrument’s front panel enable configuration for generation of set values in either engineering units or percentages. Panel keys also enable generation in steps that can be timed for 1 to 9 seconds per step, which it memorizes thanks to its 6 configuration keys. Simulation from the instrument —T240 and T250— can be configurated to simulate the sensor response (Pt100 or type of thermocouple selected).

The measurement function is easily selectable with the IN/OUT button, as clearly indicated on the display, which indicates the value to be measured. To prevent possible connection or manipulation errors, the measurement circuit is protected againstshort-circuits and external voltage up to 30 V, guaranteeing the instrument longer service life. The T220 and T225 models of Tinycal family are equiped with an integrated 24-V dc sypply, enabling power supply to the loop from the calibrator (active mode), or volontarily in passive mode.

All the instruments of the Tinycal family offer high precision and high-resolution measurements, which, together with their ease of use, high reliability and convenient transport, as well as reduced weight and small size, make them basic standards in an instrumentation workshop.


Download catalogue


  • In anticipation of possible connection or manipulation errors, the measuring circuit is protected against short-circuit and external tensions until 30V
  • Rechargeable batteries with great autonomy


  • Measurement/Generation with one unique tool
  • Great precision
  • High resolution


  • Calibration of transmitters 4-20 mA and 0-10V, Pt100 probes, TC and pH
  • Measurement and generation/simulation

Technical specifications

Operational temperature 0 to 50 ºC
Temperature coefficient 0,003% /ºC
Power supply to loop 24 Vcc (models T220 / T225)
Rechargeable batteries NiMH
Runtime 16 hours
Power supply to batteries charger 230 V 50 Hz
Display LCD, 41/2 digits, 10 mm high
Dimensions 83 x 152 x 33 mm
Weight 240 to 300 gr.
Generation Manual or automatic
Step time Programmable between 1 and 9 seconds
Label EC
Warranty 2 years
Signal Resistencia and Pt100 (as per IEC 751)
Simulation range 2 years80 to 390 Ohms (-50 to 850 ºC) (simulation current is 0,1 a 2 mA)
Simulation response 2 mS (accepts pulsating transmitters/indicators)
Accuracy at 23ºC ± 3ºC -50 to 150 ºC: 0.1 ºC (up to 850 ºC:0.2 ºC)
Uncertainty 1 year -50 to 150 ºC: 0.2 ºC (up to 850 ºC: 0.4 ºC)
Measurement range 2 years20 to 320 Ohms (-220 to 600 ºC) (current applied 1mA aprox.)
Input impedance >10 M Ω
Accuracy at 23ºC ± 3ºC -220 to 150 ºC: 0.1 ºC (± 1 count); up to 600 ºC: 0.2 ºC (± 1 count)
Uncertainty 1 year 220 to 150 ºC: 0.2 ºC (± 1 count); up to 600 ºC: 0.4 ºC (± 1 count)
Resolution 0.1 Ohm or 0.1 ºC/0.2 ºC
Function Measurement and generation/simulation

  • Product configuration and extras

Request Information

    I agree and I have read the legal notice.

    In compliance with the LOPD 15/1999 of 13 December, we inform you that your data could become part of the information owned by the company Gometrics S.L. You have the right of access, rectification, opposition and cancellation that can be exercised in a written way to the address above. You hereby expressly authorize the company to send you information about its services to the e-mail address indicated in the form. The information provided on this website is merely informative and is in no way binding.